香 港 駿 弘 電 器 維 修 

                                                                

          

商業電器維修:5531 1921 

家庭電器維修:6764 5053

維修售後支援:5445 4474

(只支援售後,不支持免費查詢或教學)

香 港 駿 弘 電 器 維 修 

                                                                

          

你生活上的細節我們用心維護,你的生命安全我們放在首位。 

Chun wang Electrical repair

                                                                

          

首頁 >> 駿弘維修日記 >>维修製冰机 >> The Crescent Ice Machine is popular in summer. If something goes wrong, please contact Hong Kong Junhong!
詳細內容

The Crescent Ice Machine is popular in summer. If something goes wrong, please contact Hong Kong Junhong!

The Crescent Ice Machine is popular in summer. If something goes wrong, please contact Hong Kong Junhong!

 

In summer, ice cubes of various shapes appear on the market. Not only large restaurants, but also many roadside drink shops also provide various drinks with ice cubes. Among them, the Crescent Ice Machine has quietly entered everyone's lives. After all, it is electrical equipment, so after long-term use, various failures will inevitably occur. So what specific problems will you encounter? How to solve it? In fact, just contact Hong Kong Junhong Electrical Appliances for repair. Especially in the summer, Hong Kong Junhong often receives a large number of repair cases for Crescent Ice Machine. Recently, there happened to be a repair case for Midea Ice Machine, which can be used as a reference and provide everyone with repair plans.

 

1. Unable to turn on or the motor makes a buzzing sound and does not produce ice.

 

1. If it cannot be turned on, you first need to check the power supply problem. You can measure it with a multimeter to see whether the specific power supply current passes through the device. If it is a power supply problem, just repair the power supply.

 

2. If there is no problem with the power supply, or the motor makes a noise but does not produce ice. Then it may be because the motor is faulty, or the water inlet pipe and de-icing port are not functioning properly. Generally speaking, Hong Kong Junhong electrical repair masters will first disassemble and inspect the motor, and will investigate one by one, and finally find the key to the problem, and then repair or replace parts.

 

2. The machine operates normally, but cannot form ice.

 

1. The device operates normally, but the failure to form ice may be due to a problem with the thermometer. Once the thermometer cannot figure out the normal temperature, it may malfunction and prevent ice from forming.

 

2. It is also possible that the control panel is faulty. The temperature determined on the control panel did not reach the actual temperature, causing the final ice cubes to fail to form. If the control panel fails, it is equivalent to a computer board failure and needs to be replaced entirely. It is best to look for original parts. But if the style is older and the original factory no longer has corresponding accessories, then it can be used as a replacement.

 

Generally speaking, the entire equipment principle of the crescent ice machine is relatively simple, and the point of failure is relatively simple. However, because it requires the replacement of accessories and is caused by electrical equipment, if you encounter problems, you can directly contact Hong Kong Junhong Electrical Appliances for repair. Come and deal with it, their masters will classify the problem according to the problem, and help with cost control from the customer's perspective, which is quite reliable and professional!


seo seo