There is a problem with the belt of the transport equipment. How can Hong Kong Junhong solve it easily?

Many factories now use sports equipment, and adopt a one-stop service model from raw materials to processing, to decoration, and finally to finished products, packaging, transportation, etc. And if you want this train to operate reliably, the belts between the equipment and the equipment are indispensable. Once the belt is damaged, it may directly cause the equipment to become inoperable. Replacing the belt is a necessary step. Hong Kong Junhong Electrical Maintenance has just handled a case involving the replacement of Sidebao belts, which can make everyone more familiar with belts and troubleshooting.

1. Belt troubleshooting

Belt failure is mainly due to damage. After long-term operation, because the belt needs to connect all the equipment, damage will often occur. There are two reasons for this.

1. Belts are often easily damaged due to long-term environmental humidity or excessively high or low temperatures. Generally speaking, a specific environment requires a specific belt, so belts with relatively high quality from a relatively brand are often more popular and have a longer service life. Once a fault occurs, a professional master will need to come to replace the belt of the original brand.

2. The belt is scratched due to the sharpness of the product. Over time, the scratched area will gradually become larger, causing the entire belt to break. Therefore, when choosing a belt, you need to select the brand and size based on the thickness that the product can withstand. Not all belts can be used.

2. Belt troubleshooting steps

1. It is necessary to check the belt for problems while the motor is running. If there is damage, it needs to be marked.

2. Stop the motor and repair the problem, or replace the entire belt. Generally speaking, if the problem is not serious, then proper repairs will be enough. If the problem is serious, the entire belt needs to be replaced. Replacing the belt requires a professional master to handle it. The masters at Hong Kong Junhong Electrical Appliance Repair are also quite familiar with these accessories, making it easier to handle them.

It is precisely because of this that Hong Kong Junhong Electrical Maintenance Company is needed to deal with the problem of belt replacement. Not just the belt, but if the entire conveyor equipment fails, it can also be handled and repaired by a master. Of course, the belt is one of the keys to the one-stop equipment, so if the environment is not good, you need to make a better choice for the belt brand and pay attention to maintenance, so you can avoid replacement problems.